Montana State University
Academics | Administration | Admissions | A-Z Index | Directories

Montana State Universityspacer Mountains and Minds
MSU AcademicsspacerMSU AdministrationspacerMSU AdmissionsspacerMSU A-Z IndexspacerMSU Directoriesspacer

> MSU Catalog
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING

Contact Information

http://www.coe.montana.edu/mie/
Application Deadlines:
           Fall:                        July 1                      (March 1, if applying for teaching assistantship)
           Spring:                   November 15
Note: International applicants must submit their applications two months prior to the above dates.

Department Head
C.H.M. Jenkins, Ph.D., P.E.
220 Roberts Hall; (406) 994-2203
cjenkins@me.montana.edu

Graduate Program Coordinator - Industrial and Management Engineering
D.K. Sobek II, Ph.D.
306C Roberts Hall; (406) 994-7140
dsobek@ie.montana.edu

Graduate Program Coordinator - Mechanical Engineering
D.S. Cairns, Ph.D.
320 Roberts Hall; (406) 994-6050
dcairns@me.montana.edu

Industrial and Management Engineering Professors

    • R.J. Marley; human factors/ergonomics, applied statistics, engineering management.
    • J. Stanislao (Adjunct); engineering economics, manufacturing, process engineering.
    • N.J. Ward; traffic safety, driver behavior, system interface design, product design and usability analysis, human factors, ergonomics.
Associate Professors
    • E.L. Mooney; discrete optimization, scheduling, systems modeling, operations research.
    • D.K. Sobek II; management engineering, product development, production engineering and management, lean manufacturing.
Assistant Professors
  •  M.H. Cole; facilities planning, transportation, logistics, production systems, optimization, engineering ethics

Mechanical Engineering Professors

  • M.R. Amin; heat transfer, fluid mechanics, numerical methods, fire phenomena energy systems.
  • D.S. Cairns; materials, composites, numerical modeling, solid mechanics, mechanics of materials and structures.
  • V. Cundy; combustion, heat transfer, incineration of waste, fluid mechanics.
  • C.H.M. Jenkins; computational and experimental mechanics, analysis and design of compliant structures, continuum and solid mechanics, theoretical and experimental structural dynamics, mechanical design.
  • A. Vinogradov; solid mechanics, mechanics of materials and structures, composites, materials.
Associate Professors
  • A.H. George; heat transfer, measurements and instrumentation.
Assistant Professors

  • S. Codd; magnetic resonance microscopy studies of ceramics, fluid dynamics in hydrogels, biofilms, and polymer electrolyte membranes.
  • A. Mian; microsystems (MEMS and BioMEMS) design, fabrication, reliability, and packaging.
  • D. Miller; experimental mechanics of materials, structures/property relationships to strength and damage, shape memory alloys, dynamic properties of materials.
  • S. Sofie; innovative ceramic processing, microstructure/nano structure engineering, solid oxide fuel cells, high-temp piezoelectrics, high-temp superconductors, thermoelectrics, and photoluminescent ceramics.

Research Professors

  • R. Badaliance; materials and structures

Degrees Offered
M.S. in Industrial and Management Engineering
M.S. in Mechanical Engineering
Ph.D. in Engineering -- Industrial Engineering and Mechanical Engineering options

The department offers the Master of Science degree in Industrial and Management Engineering and the Master of Science degree in Mechanical Engineering. These degrees may be accomplished under Plan A (thesis required) or Plan B (project or professional paper). Under either plan, a program of study is arranged for each student according to his/her particular goal. The department also participates in the Doctor of Philosophy in Engineering degree coordinated through the College of Engineering (refer to the College of Engineering section).

Admission

Industrial and Management Engineering
The minimum requirement for admission is a Bachelor of Science degree and evidence of an ability to maintain a minimum 3.0 grade point average while pursuing a graduate degree.  Applicants without a degree in Industrial Engineering (or similar) are eligible to apply, but may be required to make up subject matter deficiencies upon admission.  For complete information, refer to the Admission Policies and Application Requirements sections. Successful applicants are accepted into both the department and The Graduate School.

Mechanical Engineering
Normally, applicants must present evidence of graduation with a bachelor's degree in engineering with ability to maintain a "B" average. Graduates in other fields may be accepted, but generally these students have to make up background material in certain subject areas. Refer to the Admission Policies and Application Requirements sections for detailed admission and application requirements. Successful applicants are accepted into both the department and the College of Graduate Studies.

Research Requirements

Industrial and Management Engineering
A research experience is required for the M.S. degree in Industrial and Management Engineering, Plan A only. Areas of study include operations research, engineering economy, computer modeling, applied statistics, simulation, logistics, management engineering, human factors, ergonomics, computer integrated manufacturing, quality control, and production planning and scheduling.
Master's students following Plan B (project or professional paper) choose additional coursework and a graduate project in lieu of completing a thesis.  Plan B students complete a graduate project, under the supervision of a professor, in the student's particular area of interest, and demonstrate their ability to define, organize, and follow through on a small research investigation. The project requires both oral and written reports.

Plan A - Thesis Option

Industrial Engineering Undergraduate Degree
I&ME 500-level courses 12 cr.
I&ME 400-level or non-I&ME courses  9 cr.
I&ME 590 Thesis 10 cr.

Non-Industrial Engineering Undergraduate Degree
I&ME 500-level courses 12 cr.
I&ME 400-level courses 9 cr.
I&ME 590  Thesis 10 cr.
                                                                                                                                               
Plan B - Non-Thesis Option
Industrial Engineering Undergraduate Degree
I&ME 500-level courses  18 cr.
I&ME 400-level or non-I&ME courses 9 cr.
I&ME 575  Research or Professional Paper/ Project 3 cr.

Non-Industrial Engineering Undergraduate Degree
I&ME 500-level courses 12 cr.
I&ME 400-level courses   9 cr.
I&ME 575  Research or Professional Paper/ Project 3 cr.

Students may use a 500-level course to meet a 400-level course requirement. Plan B students may elect to substitute two courses (at least one of which is a 500-level course) for I&ME 575. 

Mechanical Engineering
For a M.S. in Mechanical Engineering, research is required in Plan A only. Students following Plan B are not required to write a thesis, but are required to complete a graduate project under the supervision of a professor.
Plan A - Thesis Option
21 formal, graded course credits: 12 required, plus 9 elective.
Required Courses

ME 510 Engineering Analysis I   3 cr.
ME 511  Engineering Analysis II  3 cr.
EM 525 Continuum Mechanics   3 cr.
3 Graduate course credits outside the student's emphasis 3 cr.
ME 500 Seminar  ( two semesters)  2 cr.
ME 590 Thesis 10 cr.
Elective Courses (Maximum of 3 cr. ME 570) 9 cr.

Plan B - Non-Thesis Option
           The Plan B option substitutes a professional paper (3-4 credits) and additional coursework in lieu of the 10 thesis credits.

Research Facilities
The laboratories of the department are well equipped for research in all areas supported by the department. Flexible manufacturing systems, robotics, machine vision, and computer-aided manufacturing are supported by a computer integrated manufacturing laboratory. Extensive facilities for destructive and non-destructive testing of advanced materials and structures are available. Advanced manufacturing facilities for composite materials and structures are continually expanding. An ergonomics/human factors laboratory concentrates on industrial ergonomics with equipment to address biomechanical and physiological aspects of industrial tasks. Facilities for decision support
systems, facilities design, and expert systems are undergoing expansion. Arrangements can also be made for graduate students to use the research facilities of other University departments. State-of-the-art computer facilities are available at the department, college, and university levels. Research is sponsored by industry and governmental agencies.

Examinations
All Mechanical Engineering and Industrial and Management Engineering master's degree students must follow the degree requirements listed in the For Master's Students section.
Doctoral candidates are required to pass three examinations: Ph.D. qualifying examination, Ph.D. comprehensive examination, and Ph.D. thesis defense. Refer to the For Doctoral Students and Ph.D. in Engineering sections for additional information.
Students are expected to be familiar with department, college and Division of Graduate Education requirements.

Financial Assistance
Both teaching and research assistantships are available on a competitive basis. Teaching assistantships involve assisting professors with the conduct of their classes, including preparation and grading. Research assistantships provide the opportunity for work on a research grant or industry sponsored project under the direction of a faculty member. Interested applicants should make inquiry directly to the Graduate Program Coordinator in I&ME or ME.
See the Graduate Assistantships sections for detailed information on appointment criteria.


> Back to Table of Contents


View Text-only Version Text-only Updated: 2/09/08
spacer
© Montana State University 2006 Didn't Find it? Please use our contact list or our site index.