Publications

Papers in HTML format

  • "Reflectance reference standards using computer generated holograms"
  • Download in postscript format

Textbooks

Publications, Papers and Presentations

Textbooks Published

  1. F. M. Cady, Microcontrollers and Microcomputers: Principles of Software and Hardware Engineering, Oxford University Press, NY (1997)
  2. F. M. Cady, Software and Hardware Engineering: Motorola M68HC11, Oxford University Press, NY (1997)
  3. F. M. Cady, Software and Hardware Engineering: Motorola M68HC12, to be published, Oxford University Press, NY (2000)

Publications and Papers

  1. R. W. Hellings, F. M. Cady, A. V. Olson, "Design description and performance of a gravity wave receiver," in preparation for submission to Optics Communications
  2. F. M. Cady, D. M. Krings, "Polarization of light scattered from computer generated holograms of diffuse objects," submitted to Optics Express, July 1999
  3. F. M. Cady, D. M. Krings, "Spatially-resolved Stokes vector measurements," Review of Scientific Instrumentation, Vol 69, Nr. 10, pp. 3491-3493,October 1998
  4. F. M. Cady, "Measurements of striae in CR+ doped YAG laser crystals: imaging system description, operation manual and final report," 1994 NASA-ASEE Summer Faculty Final Report, August (1994)
  5. T. F. Schiff, M. W. Knighton, D. J. Wilson, F. M. Cady, J. C. Stover, J. J. Butler, "Design review of a high-accuracy UV to near-IR scatterometer," Proc. SPIE, Vol 1995, Optical Scattering: Applications, Measurement, and Theory II, p. 121-123, (1993).
  6. F. M. Cady, M. W. Knighton, D. R. Cheever, B. D. Swimley, T. L. Huntdoff, T. Schiff, M. E. Southwood, "A design review of a broadband, three-dimensional scatterometer," Proc. SPIE, Optical Scattering: Applications, Measurement, and Theory II, Vol. 1753, p. 148-157, (1992).
  7. F. M. Cady, J. C. Stover, D. R. Bjork, M. L. Bernt, M. W. Knighton, D. J. Wilson, D. R. Cheever, "Design review of a multiwavelength, 3-D scatterometer," Proc. SPIE, Vol. 1331, Stray Radiation in Optical Systems, p. 201-208, (1990).
  8. J. Rifkin, K. A. Klicker, D. R. Bjork, D. R. Cheever, T. F. Schiff, J. C. Stover, F. M. Cady, D. J. Wilson, P. D. Chausse, K. H. Kirchner, "Design review of a complete angle scatter instrument," Proc. Frontiers in Electrooptics, Electro-Optics and Laser International, Birmingham, England, (1990).
  9. J. C. Stover, J. Rifkin, D. R. Cheever, K. H. Kirchner, T. F. Schiff, F. M. Cady,  "Comparisons of Wavelength Scaling Predictions to Experiment," Proc. Frontiers in Electrooptics, Electro-Optics and Laser International, Birmingham, England, (1990).
  10. T. F. Schiff, J. C. Stover, D. R. Cheever, D. R. Bjork, F. M. Cady, "Maximum and Minimum Limitations Imposed on BSDF Measurements," Proc. Frontiers in Electrooptics, Electro-Optics and Laser International, Birmingham, England, (1990).
  11. J. C. Stover, M. L. Bernt, F. M. Cady, "An investigation of anomalous scatter from Beryllium mirrors," Proc. Frontiers in Electrooptics, Electro-Optics and Laser International, Birmingham, England, (1990).
  12. J. C. Stover, F. M. Cady, "IRST background noise contributions from window scatter," Proc. Frontiers in Electrooptics, Electro-Optics and Laser International, Birmingham, England, (1990).
  13. F.M. Cady, D.R. Bjork, J. Rifkin, Stover, J.C., "Linearity in BSDF measurements," Proc. SPIE, Vol. 1165, Scatter from Optical Components, p. 192-201, (1989).
  14. F.M. Cady, D.R. Bjork, J. Rifkin, J. C. Stover, "BRDF error analysis," Proc. SPIE, Vol. 1165, Scatter from Optical Components, p. 154-164, (1989).
  15. F.M. Cady, J. C. Stover, W.J. Senecal, "A system design for a dental image processing system," Proc. SPIE, Vol. 974, Applications of Digital Image Processing XI, (1988).
  16. F.M. Cady, J. C. Stover, T.F. Schiff, K.A. Klicker, D.R. Bjork, "Measurement of very near specular scatter," Proc. SPIE, Vol. 967, Stray Light and Contamination in Optical Systems, p. 264-271, (1988).
  17. D.R. Bjork, K.A. Klicker, F.M. Cady, "Predicting Laser Port Scatter," Proc. SPIE, Vol. 967, Stray Light and Contamination in Optical Systems, (1988).
  18. D.E. McGary, J. C. Stover, J. Rifkin, F.M. Cady, Cheever, D.R., "Separation and measurement of surface scatter and volume scatter from transmissive optics," Proc. SPIE, Vol. 967, Stray Light and Contamination in Optical Systems, p. 197-203, (1988).
  19. J. Rifkin, K.A. Klicker, D.R. Bjork, D.R. Cheever, T.F. Schiff, J. C. Stover, F.M. Cady, D. J. Wilson, P. D. Chausse, K. H. Kirchner, "Design review of a complete angle scatter instrument," Proc. SPIE, Vol. 1036, Precision Instrument Design, p. 116-124, (1988).
  20. F.M. Cady, D.R. Cheever,K.A. Klicker, J. C. Stover "Comparison of scatter data from various beam dumps", Proc. SPIE, Vol. 818, Current Developments in Optical Engineering II, (1987).
  21. D.R. Cheever, F.M. Cady, K.A. Klicker, J. C. Stover "Design review of a unique complete angle-scatter instrument (CASI)", Proc. SPIE, Vol. 818, Current Developments in Optical Engineering II, (1987).
  22. J. C. Stover, C.H. Gillespie, F.M. Cady, D.R. Cheever, K.A. Klicker "Wavelength scaling of BRDF scatter data," Proc. SPIE, Vol. 818, Current Developments in Optical Engineering II, (1987).
  23. J. C. Stover, C.H. Gillespie, F.M. Cady, D.R. Cheever, K.A. Klicker, "Comparison of BRDF data from two scatterometers," Proc. SPIE, Vol. 818, Current Developments in Optical Engineering II, (1987).
  24. K.A. Klicker, J. C. Stover, D.R. Cheever, F.M. Cady "Practical reduction of instrument signature in near specular light scatter measurements", Proc. SPIE, Vol. 818, Current Developments in Optical Engineering II, (1987).
  25. J. C. Stover, K.A. Klicker, D.R. Cheever, F.M. Cady "Reduction of instrument signature in near angle scatter measurements", Proc. SPIE, Vol. 749 Metrology: Figure and Finish, 46-53, (1987).
  26. F.M. Cady, J. Myers, N.K. Shrauger, "Prescriptions for Engineering Communications," submitted to IEEE Trans. on Education, (1987).
  27. J. C. Stover, F.M. Cady, E. Sklar, "The Measurement of Low Angle Scatter," Optical Engineering, Vol. 24, No. 3, pp. 404-413, (1984)
  28. F.M. Cady, R.M. Hodgson, "Microcomputer-Based Interactive Image Processing," Microcomputers in Measurement, Signal Processing and Control, ed. S.G. Tzafestes. Dordrecht, Holland: D. Reidel, (1983)
  29. Hodgson R.M., F.M. Cady "A system design for a multispectral sensor using 2-D solid-state imaging arrays," IEEE Trans. on Geoscience and Remote Sensing, Vol. GE-20, No. 2, pp. 177-179, (1982)
  30. R.M. Hodgson, F.M. Cady, D. Pairman, "A solid-state aircraft sensing system for remote sensing," Photogrammetric Eng. & Remote Sensing, Vol. 47, No. 2, pp. 177-183, (1981)
  31. F.M. Cady, R.M. Hodgson "Image Processing with Microcomputers in Remote Sensing," Technical Papers, 47th Annual ASP/ACSM Convention, Washington, D.C., pp. 140-149, (1981)
  32. F.M. Cady, R.M. Hodgson, D. Pairman, M.A. Rodgers, M.A., G.J. Atkinson, "Interactive image processing software for a microcomputer," IEE Proc., Pt. E., Vol. 128, No. 4, pp. 165-171, (1981)
  33. R.H.T. Bates, W.R. Fright, F.M. Cady, G. L. Berzins, "Speckle processing, shift-and-add and compensating for instrument aberrations," Proc. S.P.I.E. Advanced Institute on Transformations in Optical Signal Processing, Seattle, WA, 22-25 February (1981)
  34. F.M. Cady, R.H.T. Bates "The simulation and results of a new speckle image processing technique," Proc. I.A.U. Colloquium No. 62, Flagstaff, Arizona, 19-21 May (1981)
  35. F.M. Cady, R.M. Hodgson "A Microprocessor Based System for Dedicated or Interactive Image Processing Applications," Proc. SPIE. Design of Digital Image Processing Systems, Vol. 301, San Diego, CA, (1981)
  36. F.M. Cady "A synthesis approach to a computer architecture lecture," IEEE Trans. on Education, Vol. E-23, No. 1, pp. 22-28 (1980)
  37. R.H.T. Bates, F.M. Cady, "Towards true imaging by wideband speckle Interferometry," Opt. Commun., Vol. 32, No. 3, pp. 365-369, (1980)
  38. F.M. Cady, R.H.T. Bates "Speckle processing gives diffraction limited true images from severely aberrated instruments," Optics Letters, Vol. 5, No. 10, pp. 438-440, (1980)
  39. F.M. Cady, R.M. Hodgson "A microprocessor based interactive image processing system," IEE Proc., Pt. E., Vol. 127, No. 5, pp. 197-202, (1980)
  40. F.M. Cady Applications of Microcomputers in Interactive Image Processing, Ph.D. Dissertation, Department of Electrical Engineering, University of Canterbury, Christchurch, N.Z., (1980)
  41. F.M. Cady "Aids for software development," Automation and Control, Vol 10, No. 3, (1980)
  42. F.M. Cady "A microcomputer training course," IEEE Trans. on Education, Vol. E-22, No. 1, pp. 21-22, (1979)
  43. R.M. Hodgson, F.M. Cady, J.K.N Murphy, "The development of a multispectral scanner to be flown in light aircraft," Proc. of Landsat 79, May 1979, Sydney, Australia. (1979)
  44. F.M. Cady, R.M. Hodgson, A.J. Ireland, G.A. Duncan, "A CCD Based Image Processing System," Proc. N.Z.I.E. Electro-Technical Group, 4, 2E,(1978)
  45. F.M. Cady "Inhibitory data processing in the retina," Man Machine Studies, Progress Report UC-DSE/3, Department of Electrical Engineering, University of Canterbury, Christchurch, N.Z. (1973)

Papers Presented

  1. "Gravity wave simulator", invited paper, Optical Science and Laser Technology Conference, Bozeman, MT, August (2000)
  2. "From OMEGA to LISA: The receiver development continues", invited paper, Optical Science and Laser Technology Conference, Bozeman, MT, August (1999), http://www.montana.edu/wwwoptec/FredCadyOpTeC1999_files/v3_document.htm
  3. "The OMEGA project: Overview and DSP Phase Tracking," invited paper, Optical Science and Laser Technology Conference, Bozeman, MT, August (1998)
  4. "Spatially Resolved Stokes Vector Measurements and Other Topics," invited paper, Optical Science and Laser Technology Conference and the Montana EPSCoR Conference, Bozeman, MT, August (1997)
  5. "Stokes Vector Polarization Measurements," invited paper, Conference of Optical Science and Laser Technology, Bozeman, MT, September (1996)
  6. "Digital Signal Processing Applied to Laser Stabilization," invited paper, Conference of Optical Science and Laser Technology, Bozeman, MT, September (1996)
  7. "Digital signal processing (DSP) for optical systems?", presented at OpTeC Cluster Seminar Series, July (1996)
  8. "Student computer ownership, attitudes and history: two surveys a decade apart," presented at Frontiers in Education FIE95, Atlanta, GA, November (1995)
  9. "Striae measurements," presented at the Annual Materials Review Seminar, Montana State University, March (1995)
  10. "The development of reflectance reference standards using holographic techniques," presented at the Optics Cluster Seminar, Montana State University, February 22 (1995)
  11. "A review of spatially resolved index measurements," invited paper, Conference of Optical Science and Laser Technology, Bozeman, MT, August (1995)
  12. "The development of reflectance reference standards using holographic techniques" and "Measurements of striae in CR+ doped YAG crystals", invited paper, Conference on Optical Science and Laser Technology, Bozeman, MT, August (1994)
  13. "Techniques for measurement and interpretation of optical scatter," seminar presented at Laser Lines Ltd., Banbury, England (1990)
  14. "A four band solid-state array and microcomputer based remote sensing system for use in light aircraft," R. M. Hodgson and F. M. Cady, presented at Second Australasian Landsat Conference - LANDSAT 1981, Canberra,k Australia, September (1981)
  15. "Speckle image processing and simulation equipment," presented at a seminar Royal Greenwich Observatory, Herstmonceaux Castle, England, September (1980)
  16. "Aids for software development," presented at NELCON 79, Christchurch, NZ, August (1979)
  17. "PIKKY-A floppy disk based interactive picture processing system," co-author, presented at NELCON 79, Christchurch, N.Z. August (1979)
  18. "Core balance, isolation and earthing techniques used to combat electrical hazards," presented at a seminar Hospital Electrical Safety, Departments of Electrical Engineering and Extension Studies, University of Canterbury, Christchurch, N.Z. July (1976)
  19. "Undergraduate laboratories," presented at a seminar Electronics in Industry-Training for a Developing Industry, Departments of Electrical Engineering and Extension Studies, University of Canterbury, Christchurch, N.Z., October (1976)
  20. "Modifications to expand a SC/MP microprocessor kit into a useful system development tool," presented at Colloquium on Microprocessor Systems, Institute of Engineers, Sydney, Australia, November (1976)
  21. "An analysis of averaging techniques used with evoked responses," presented at 10th N. Z. National Electronics Conference, August 29-31, Christchurch, N.Z. (1973)